Briteline® Shield overlaminating film is a pressure sensitive 3-mil PVC film on a smooth paper liner that comes with three finishes: matte, gloss, and luster. This laminate offers protection from abrasion, moisture and other environmental exposures. It is laminated by the cold laminating process without the addition of heat.
Downloadable Product Sheets
Briteline® Overlaminate Luster Specifications Briteline® Overlaminate Matte Specifications Briteline® Overlaminate Gloss Specifications Briteline® Application Chart Shield Product VideoApplications
Overlaminating vinyl film is designed to protect digital image prints and screen-printed images for exhibit and display graphics. Can be used in most instances where an overlay with a matte finish is required.
Adhesion
To stainless steel 48 oz/in. When tested according to PSTC-1 with 24 hr. dwell at 70°F and 50% relative humidity. Typical values. Individual values may vary.
Test thoroughly before production
Thickness
Film | 3 mil |
Adhesive | .8 to 1.0 mil |
Liner | 4.0 mil |
(Thickness variance ± 10%) |
Available Sizes
Matte | Gloss | Luster |
38” x 150’ | 30” x 150’ | 30” x 150’ |
54” x 150’ | 38” x 150’ | 38” x 150’ |
60” x 150’ | 54” x 150’ | 54” x 150’ |
60” x 150’ |
Temperature Ranges
Minimum application temperature is 40°F.
Service temperature range is -40°F to 180°F.
Durability
- 3 year indoor
- 4 year outdoor
Dimensional Stability
- Good