Briteline® Reflective is a 5-mil printable reflective vinyl film with high initial tack and permanent pressure-sensitive adhesive. The film conforms well to both flat and irregular surfaces.Briteline Reflectivemeets or exceeds the following standards for motor vehicles: ISO 7591-1982, DOT FP-85 -Section 718, and ASTM-D 4956-89, Spec. Type 1, Class 1. Designed for Latex, Eco-Solvent and Solvent print systems.
Buy Now at Grimco:
Applications
- Vehicle Graphics (Full, Partial)
- Vehicle Decals
- Fleet Graphics; Fleet Markings
- Recommended with dry application methods only
Adhesion
PSTC-1, 15 min. 70°F (21° C)
≥ 4.4 lbs/in
Specs
| Thickness | 5 mil |
| Adhesive | Permanent/Clear |
| Release Liner | Lay-Flat Polycoated |
| Surface Finish | Gloss, meter 60° Reflection |
Temperature Ranges
On clean, dry substrate: 60°F to 90°F.
Service temperature range is -65°F to 160°F.
Durability
- Flat surfaces up to 7 years
- Irregular surfaces up to 5 years
- Printed durability is dependent on the ink system used
Dimensional Stability
- 158°F (70°C), 48 hours
- < 10 mils
Recommended Overlaminate
| OLWC-GLS54 | 54"x150' BRITELINE WRAPCAST GLOSS LAM |
| OLWC-MAT54 | 54"x150' BRITELINE WRAPCAST MATTE LAM |
| OLWC-OPT54 | 54"x150' BRITELINE WRAPCAST OPT.CLR LAM |
| OLWC-SAT54 | 54"x150' BRITELINE WRAPCAST SATIN LAM |
Shelf Life
12 months
- Store in conditions that are at a temperature of 20-25deg. And 40-50% Humidity
- Store in a cool & dry place.
- Do not store close to a heat source or in direct sunlight.
- Keep material in its original packaging until ready for use.
