Briteline® DurationX is a 3-mil premium white gloss flexible calendered vinyl film coated with permanent gray acrylic pressure sensitive adhesive laminated to a 90# air-egress layflat liner. This film is designed to accept a variety of solvent-based, UV curable and latex inks common to wide format digital printing systems. The adhesive offers good opacity with low initial tack building to a permanent bond within 24 hours providing repositionability to the graphic during application.
Downloadable Product Sheets
Briteline® DurationX Specifications Briteline® Application Chart 
Duration Product Video 
Applications
Briteline®® DurationX is designed for large format interior or exterior signage, decals, nameplates and POP displays.
Recommendations
Completely evaporate ink solvents before application. Failure to do so may facilitate solvent penetration resulting in premature vinyl degradation
Thickness
| Film | 3 mil |
| Adhesive | .8 to 1.0 mil |
| Liner | 7.5 mil |
| (Thickness variance ± 10%) | |
Thickness
| Gloss | Matte |
| 54” x 150’ | 54” x 150’ |
Adhesion
- To stainless steel 40 oz/in.
- PSTC-101 Method A with 24 hr. dwell at 70°F and 50% relative humidity.
- Typical values. Individual values may vary.
- Test thoroughly for your specific application.
Dimensional Stability
- Good
Temperature Ranges
Minimum application temperature is 40°F.
Service temperature range is -40°F to 180°F.
Expected Exterior Exposure
5 years under normal exposure.
Storage Stability
6-month shelf life when stored at 70 F and 50% relative humidity.
