50/50 Window Perf
A 6-mil white/black composite PVC with clear removable acrylic pressure-sensitive adhesive. 50/50 (50% open) hole pattern. Available with an unperforated solid paper liner; for latex printers. Or a clear liner consisting of clear PET film laminated to perforated paper to absorb ink; for Eco-solvent, solvent and UV printers.
Available US Only
Downloadable Product Sheets
Briteline® Window Perf 50/50 Specifications Briteline® Application Chart 
Applications
Windows, glass doors or other transparent surfaces for short-term POP, retail window graphics or similar applications.
Expected Exterior Exposure
Up to 1 year; 3 months for clean removal. Adhesion may increase with time. Testing recommended before production to determine suitability of product for intended application.
Thickness
| Film | 6 mil |
| Adhesive | .5 |
| Solid Paper Liner | 6 mils (.006 in./153 microns), approx. |
| Clear PET Liner | 5.5 mils (.0055 in./140 microns), approx. |
Available Sizes
| Clear Liner | Paper Liner |
| 54” x 100’ | 27” x 100’ |
| 60” x 100’ | 30” x 100’ |
| 54” x 25’ | |
| 54” x 100’ | |
| 60” x 25’ | |
| 60” x 100’ |
Adhesion
- N/A
Dimensional Stability
- Fair
Surface Gloss
- N/A
Perforation Size
- Approx. 0.062 in. (1.6 mm)
Temperature Ranges
Minimum application temperature is 40°F.
Service temperature range is 0°F to 140°F
Storage Stability
6-month shelf life when stored at 70° F and 50% relative humidity.
Recommendations
Use standard vinyl inks. Print image on vinyl, not on the release liner. Briteline® Window Perf with the solid paper liner is compatible with screen printing; inkjet printing using solvent, eco-solvent and mild solvent inks; latex; thermal transfer; and airbrushing. Briteline® Window Perf with the clear PET liner is compatible with UV-cure inks and above printing methods except latex inks.
Apply to clean, dry glass surface. Use plain soap and water, rinse and dry glass well. Do NOT use ammonia, Windex® or other solvent-based glass cleaners prior to application.
Remove by peeling from surface. Remove adhesive residue on older installations, if necessary.
